So my last post was April 14, '09. I never intended to stop blogging the pan build but shit happens and I stopped. Maybe it's a winter thing..
A lot happened to the pan since last blog technical update.
- Engine - confidently built and installed
- Headers wrapped and an exhaust baffle installed ( later directed to be removed by padre - a good choice)
- Oil lines routed and filter located just behind the transmission.
- New clutch assembly installed (old one had stripped studs and couldn't hold axial loading) - got a good assembly with more modern 5 threaded studs vs. 3.
- Made a carb support that drops from the top engine mount.
- Rattle-can painted the fork / frame in a semi-gloss black.
- Painted fender, gas and oil tanks with the silver / green metallic color
- Mechanically assembled everything
- Then did some wiring fuckin fantastic wiring.
- Found lots of 20w50 oil and bought. Then read about pan ol' faithful's on 20w50 so found some 50w. Still started with the 20w50.



When all assembled and thought to be ready - I did some static ignition timing and think I got things relatively close to good. This was pretty tricky with the auto advance but how the hell can you actually tell. I tried starting roughly and nothing was happening. Fuel = ok. Spark seemed a little weak and compression didn't seem altogether that great. I don't have a compression gauge and went with the rule of thumb - remove the spark plug and hold your thumb over the spark hole - if you get a sharp pressure spike enough to pop - you should be fine (this is very subjective...). Spark on these machines I guess is weak when compared to modern ignitions so this was also subjectively troubleshot without finding an error. I decided to let the pan rest for a night (I think for time I'm already somewhere early June '09!).
The next day... must have been feeling lucky or something, but went out to try kickin' again. After the priming kicks and an initial start kick - the second start kick actually got the engine to bang a couple times. MY HEART WAS F'IN OFF THE CHARTS! Just two simple pops and I had adrenaline enough to challenge Kimbo in a ho-off. A couple of more tries (maybe 10 or so) and holding WOT - it actually started running with some stability. I was frantically checkin oil pressure (nearly 30psi cold, between 7 & 2 warm), looking for leaks, watching chain movement, listening to cylinders, checking temperatures (with the raytec I borrowed from padre in April!), listening to the geartrain and oil pump... SO FUCKIN INTENSE! This is my first attempt at an engine build and although mechanically simple - being my first firing solo - I was attentive to the smallest sounds. Everything seemed ok. It still started like a limp 80 year ol dick without Viagra but it started and that's miles ahead of where I expected (set the bar low...). I let it run for about 10 minutes and get some good temperature before the first shutdown. Even had enough time to snag a call to padre and let him listen into the whole business.
I can only image the this intensity is close to what's experienced when your first child is born. I quit for the day right then - on a good panhead note.